- SKU:
- 77122527
- Weight:
- 2.06 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- COO:
- US
- HarmonizeCode:
- 8536.90.8085
- MPN:
- 7622
500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine.
PRODUCT FEATURES:
- Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
- Includes ML-Series Remote Control Contura Switch PN 2146
- Automatically manages the charging of two large battery banks
- Allows paralleling of battery banks for emergency starting
- 500 Ampere continuous rating to support high-output alternators
- Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
- Dual sensing—senses charge on both battery banks
- Start Isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
- Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
- Senses charging on two battery banks
- LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- 7/8" (22mm) stud length accepts multiple cable terminals
- Silver alloy contacts provide high reliability for switching live loads
- Label recesses for circuit identification
- Lifetime replacement warranty
PRODUCT SPECIFICATIONS:
- Blue Sea Systems Part No.: 7622
- Control Circuit Connection: Tinned Wire
- Nominal Voltage: 12V DC
- Manual Control: Yes
- Engine Isolation: Yes
- Mounting: #10
- Start Assist: Yes
- Start Isolation: Yes
- Amperage Operating Current: 13mA
- Amperage Operating Current when changing state: <7.0A
- Continuous Rating: 500A
- Intermittent Rating: 700A (5 min)
- Cranking Rating 10 sec: 2500A
- Cranking Rating 1 min: 1100A
- Cable Size to Meet Ratings: 4/0 AWG x 2
- Live Current Switching: 300A @ 12V DC
- Switching Cycles: 100000
- Terminal Ring Diameter Clearance: 1.12in (28.45 mm)
- Terminal Stud Length: 1.50in (38.1 mm)
- Terminal Stud Size: 3/8" - 16 (M10)
- Terminal Stud Torque: 140 in-lb (15.82 Nm)
- Dimensions: See image #5
RELAY CONTACT POSITION:
- Combine 30 sec: 13.5V
- Combine 90 sec: 13.0V
- Open 10 sec: 12.35V
- Open 30 sec: 12.75V
- Open High: 16.2V
- Weight: 2.06lb (0.93 kg)
Product Condition: NEW
