Blue Sea Systems Surface Mount 187 Series Circuit Breaker 25A - 7135

The Blue Sea Systems Surface Mount 187 Series Circuit Breaker 7135 provides circuit protection for 25A loads when switching and circuit protection are both required. NOTE: Do not use as a switch where high inrush currents are expected.

PRODUCT FEATURES:

• Combines switching and circuit protection into a single device*
• Clear, single lever operation
• "Trip Free" design cannot be held "ON" during fault current condition
• Waterproof
• Recessed mounting holes for clean appearance
• Large Clearance around terminal studs accept heavy gauge wire lugs
• Robust 5/16 M8 terminals provide high torque connections
• Large lever with vertical/horizontal orientation provides indication of trip status
• Ignition protected - Safe for installation in vehicles where gasoline vapors may be present, including boats
• CE marked
• Meets SAE J1171 external ignition protection requirements
• IP66—protected against powerful water jets (see inside back cover)

PRODUCT SPECIFICATIONS:

• Blue Sea Systems Part No.: 7135
  
• Amperage: 25A
  
• Maximum Voltage: 48V DC
• Mounting: Surface Mount
  
• Circuit Breaker Type: Thermally responsive Bi-metal blade
• Interrupt Capacity: 5000A @ 12V • 3000A @ 24V • 1500A @ 42V
  
• Minimum Operating Temperature: -40° C
• Maximum Operating Temperature: 85° C
• Case Material: Thermoset Polyester
• Circuit Breaker Class: Type III - switchable/manual reset - trip free
• Mounting Hole: Accept #10 (M5) Screw
• Terminal Stud Size: 5/16" - 18
• Terminal Stud Torque: 75 in-lb (8.47 Nm)
• Weight: 0.58lb (0.26 kg)
  
• Dimensions: See image #2