- SKU:
- 77197794
- Weight:
- 0.40 LBS
- so_moq:
- 20
- so_qi:
- 20
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2-3 weeks)
- Special Order Available:
- Increments of 20
- QPO:
- 0
- COO:
- MX
- MPN:
- 48610
The Cole Hersee FlexMod LVD Unit 48610 preserves battery charge and protects battery banks by automatically disconnecting loads when battery voltage drops to a critical level. The Cole Hersee 48610 automatically disconnects specified loads when unit senses that vehicle battery voltage is low; automatically reconnects when voltage is restored and protects vehicles with one battery (or bank of batteries).
Note: This is a bulk product and has no manufacturer's box or instructions. This listing is for a bulk pack of 40. Price is per unit.
PRODUCT FEATURES:
- Compact design (4” x 3” x 1”) unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
- Senses battery voltage and disconnects non-essential loads if level falls below programmed voltage. Automatically reconnects loads when battery is charging.
- Eliminates downtime and vehicle breakdown costs due to dead batteries.
- High reliability unit is rated for more than 1,000,000 on/off cycles.
- Overvoltage and overcurrent sensing protects the FlexMod and direct loads.
- Single auto-ranging unit (12V or 24V) means less stock and fewer SKUs.
- Unit is autoranging - senses 12V or 24V systems.
PRODUCT SPECIFICATIONS:
- Cole Hersee Part No.: 48610
- Package Type: Bulk
- Connector: 8-pin Sealed Deutsch type
- Details: 10 A
- Dimensions: 4 x 2.7 x 1.31
- Disconnect Voltage (12V): 12.05 V min, 12.1 V typical, 12.15 V max
- Disconnect Voltage (24V):24.1 V min, 24.2 V typical, 24.3 max
- Humidity: 0 to 90% RH
- Inductive Transient: +/- 600 V
- Ingress Protection: IP67
- Load Current: 10 A at 85C
- Load Dump: + 150 V
- Operating Temperature Range: -40 to +85C, -40 to +185F
- Overcurrent Protection: 15 A
- Quiescent Current: 2 mA max
- Rating: 10 A at 85C
- Sealing: IP67
- Shock: SAE J1455
- Standby Current: 1mA
- Vibration: 10-500 Hz
- Voltage Rating: 12 to 24 Vdc
- SI Dimensions: 101.6 x 68.6 x 33.3mm
- Thermal Shock: SAE J1455
Product Condition: NEW
