ENM 6-Digit Dual LCD Hour Meter 85-265V AC - PT1210G0

The ENM Hour Meter PT1210G0 is ideal for maintenance applications. The accumulated hours are stored on powerless, non-volatile data backup using CMOS EEPROM technology, where small space and reliable instruments are required with memory that does not rely on a battery. Hour meter module displays hour glass and decimal point.

Note: This product is a bulk product and has no manufacturers box or instructions. This listing is for a bulk pack of 25. Price is per unit.

SPECIAL FUNCTIONS:

• Allows customer to preset total hours and replace a failed meter without loss of total elapsed time
• Key lock feature to prevent unauthorized access to meter’s reset and programming functions

PRODUCT FEATURES:

• High reliability
• Quartz Crystal
• Warranty: 1 year
• Made in the U.S.A.
• Totally sealed IP67
• Relay and LED output
• Low operating current
• Solid State Electronics
• Non-volatile memory (no battery)
• Self programmable or factory set
• Fits standard round 2 inch panel openings
• Wide operating voltage and temperature range
• 10 pins connector wire harness with locking feature
• Interlock input (the reset and preset input are disabled)
• Two 6-digit, 7 segment LCD displays, channel two is self programmable
• The service LED light informs the operator when the preset value setting is reached

PRODUCT SPECIFICATIONS:

• ENM Part No.: PT1210G0
• Display: 99999.9 Hours (both displays) • Flashing icons • Automatic recycle to zero
• Display Digits: Large 6-digits • 7mm
• Operating Voltage: 85-265V AC
• Operating Current: 6mA nominal
• Operating Temperature: -25 °C to +85 °C • -13 °F to +185 °F
• Vibration Resistance: Withstands 10 to 75 Hz.at 1 to 8 G’s
• Resolution: 0.1 hour
• Protected from: Alternator load dump • Inductive switching • Reverse polarity
• Configuration: Round SAE bezel with new push-on retaining ring • Other mounting styles are also available
• Reset: Yes
• Dimensions: See attached .pdf file
• Installation Instructions: See attached .pdf file