Murphy 12 VDC PowerView CAN 8-18V Voltmeter Gage 2 in. with Low Profile SAE Black Bezel - Flat Lens - PVCAN20-C-12-BB

The Murphy 12 VDC PowerView CAN 8-18V Voltmeter Gage 2" with Low Profile SAE Black Bezel PVCAN20-C-12-BB is designed to display easy-to-read information broadcast over the SAE J1939 communications. This gage is designed to be wired directly to the J1939 CAN bus without the need of another device driving them.

The PVCAN20-C-12-BB gage includes features such as a smooth stepper motor operation for the 270° sweep pointer, an environmentally sealed case with two Deutsch DT style connectors molded into the case and green LED backlighting. In addition, the Polyester case incorporates a “D” shape allowing panel cutouts that eliminate gage rotation during installation. This gage can be powered by 12 or 24 VDC systems.

FEATURES:

• 2 inch size PowerView Gage
• Bezel Type (flat lens) Low Profile SAE Black
  
• Microprocessor driven for high accuracy
• Simple installation and wiring design
• No driving device required
• Displays SAE J1939 parameters broadcast via CAN
• Cutting edge, stepper motor technology and robust functionality combined
• For modern electronic engines and equipment using SAE J1939 Controller Area Network

PRODUCT SPECIFICATIONS:

• Part No.: PVCAN20-C-12-BB
  
• Range: 8-18V
• Voltage: 12 VDC
• Bezel Material: ABS
• Bezel Type: Low Profile SAE Black (flat lens)
• Power Supply Input Voltage: 12/24V (8-32VDC Minimum and Maxumum Voltage)
• Power Supply Operating Current: Typically 70mA
• Backlight Maximum Current: 45mA
• Input: CAN (SAE J1939)
• Operating Temperatures: -40° to 185°F (-40° to 85°C)
• Storage Temperatures: -76° to 185°F (-60° to 85°C)
• Dial: White numerals over black background
• Gage Accuracy: Better than ±1% of scale
• Maximum Panel Thickness: 3/8 in. (9.6mm)
• Connectors: 6-Pin Deutsch DT06 Series
• Environmentally Sealed Enclosure: IP68: ±5PSI (±34.4kPa) • Case and Clamp Material: Polyester (PBT) • Lens Material: Polycabonate