- SKU:
- 77116920
- Weight:
- 1.00 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2-3 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 05707744
The Murphy 6000 PSI Pressure Transmitter PXT-K-6000 is a state-of-the-art instrument providing 4-20 mA output. This pressure transmitter is a two wire type with flying lead connection and contains a transducer comprised of a piezoresistive silicon chip mounted on a glass-metal feedthrough header welded into a stainless steel housing and filled with silicone oil; the very thin laser-welded stainless steel isolation-diaphragm completes the front side. Media pressure is transferred from the stainless steel isolation-diaphragm, via the oil inside the cell, to the silicon measuring chip. This construction, combined with the advanced internal signal conditioning circuitry, results in a rugged instrument with extremely small temperature error and class-leading EMI/RFI resistance.
The enclosure and all wetted parts are made of 316L stainless steel to meet NACE MR01-75. Applications: PXT-K Series Pressure Transmitters can be used in applications such as Compressors, Engines, Process Control, Liquid Level and Pumps.
FEATURES:
- 4-20 mA Output Signal
- Piezoresistive Pressure Transmitter
- Corrosion Resistant Construction
- High Stability
PRODUCT SPECIFICATIONS:
- Part No.: PXT-K-6000
- Range: 6000 PSI
- Operating Temperature: -40 to 180°F (-40 to 82°C)
- Compensated Temperature Range: -20 to 160°F (-29 to 71°C)
- Process Connection: 1/4 NPT female with 7/8” Hex Nut
- Electrical Connection (PXT-K-XXX): 1/2” NPT Male Conduit connection with 60” long cable, vented
- Enclosure: NEMA 4/IP65 or better
- Body: 316L Stainless Steel. Meets NACE MR01-75
- Wetted Parts: 316L stainless steel
- Environmental Effect (Humidity): No effect for 0-95%, Non-condensing
- Mounting: Transmitter can be installed in any axis
- Transmitter position has negligible affect on performance as long as it is perpendicular to the flow being monitored
- Shock Resistance: 1000g per IEC 60068-2-6 (Mechanical Shock)
- Vibration Resistance: 20G per IEC 60068-2-6 (Vibration under resonance)
- Wiring Protection: Protected against reverse polarity and short circuit, 48 VDC Maximum
- Supply Voltage: 8 - 30 VDC (Typically 24 VDC)
- Transmitter Output: 4-20mA, two wire configurations with load characteristics
- Insulation: Greater than 10MΩ @ 300 VDC
- Electromagnetic Compatibility (EMC): Standards; EN 61000-6-2:2005, EN 61000-6-3:2007, EN 61326-2-3:2006
- Voltage Surge/Spike Protection: Protection against a 600
- Volt spike per IEC 60-2
- Shipping Weight: 6.5 ounces
- Applicable Standards: NACE MR0175 Compliant with the requirements • CSA (c/us): Class I / II / III, Div 1 , Groups A-F T4 • Class I / II / III, Div 2, Groups A-D,F,G T4
- ATEX: IBExU 10 ATEX 1124 X • II 1G Ex ia IIC T6-T4 • II 3G Ex nA IIC T6
Product Condition: NEW
Murphy 4-20 mA Pressure Transmitter 6000 PSI PXT-K-6000
