- SKU:
- 77209746
- Weight:
- 2.00 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2-3 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 15700181
The Murphy Explosion Proof Level Maintainer with Two Switches DPST LM303-EX automatically adds oil to the crankcase as needed to keep the lube level normal. This model has a built-in switch that will alarm and/or shutdown the equipment if the makeup supply is depleted and engine oil level falls or if overfill conditions exist. NOTE: Friction losses due to piping NOT considered.
Applications: Engines • Compressors • Pumps • Coolers
FEATURES:
- Maintains proper lube level
- Shutdown on low level, or high and low level
- Manual float switch test
- High visibility “Frog Eye” lens
- Two switches for low and high level shutdown or alarm. Four wires, DPST, wired N.C. (Normally Closed) in normal operating ranges
- CSA certified with switch contacts rated at 10 A at 250 V AC (standard)
- Explosion-Proof
PRODUCT SPECIFICATIONS:
- Part No.: LM303-EX
- Case/Cover: Die cast aluminum
- Switch Housing: Aluminum
- Approval Rating: CSA certified for Class I, Groups C and D; Class II, Groups F and G hazardous locations. Enclosure Type certified.
- Float: Rigid polyurethane foam. Polyurethane coated
- Max. Ambient Temperature: 250°F (121°C)
- Oil Inlet Connection: Top entry 1/2-14 NPT with built-in filter screen (removable for cleaning)
- Inlet Orifices: 1/4 in. (6 mm); Pressure: 4 ft. oil – 15 ft. oil (1.2 m oil – 4.6 m oil); Flow Rates: 4.7 GPH - 31.0 GPH (17.8 LPH - 117.3 LPH)
- Wire (switch models): 18 AWG x 13 in. (1.0 mm2 x 330 mm)
- Max. Inlet Pressure (MIP): 15 ft oil (4.6 m oil) with 1/4 in. (6 mm) orifice.
- Max. Differential: 2 in. (51 mm) between running and stationary oil level
- Max. Case Pressure (MCP): 15 psi (103 kPa) [1.03 bar]
- Orifice Seal: Buna-N Thumb-Valve
- Switch Contact: Silver, SPDT snap acting, rated at 10 A @ 125, 250 VAC; 10 A @ 30 VDC. (1 only for low level; 2 only for high and low; or 2 only for low level with alarm before shutdown)
- Flow Rate Test: Using SAE 30 @ 32°F (0°C)
- Outlet Connection: 3/4-14 NPT left side, right side, and bottom
- Crankcase Balance Vent Fitting: 1/2-14 NPT
- Mounting: Accepts Murphy pipe mounting bracket or universal mounting bracket
- Lens: Clear “Frog Eye” non-staining, high impact, high temperature nylon; UV and heat stabilized
- Dial: High visibility white background with green and white “index” lines for normal level indication.
- Test Knob: Rotate to test switch operation. Turn clockwise for low level test and turn counterclockwise for high level test
- Shipping Weight: 6 lbs. 12 ozs. (3.06 kg)
- Shipping Dimensions: 10-5/8 x 8-7/8 x 6-3/4 in. (270 x 225 x 171 mm)
Product Condition: NEW
Murphy Explosion Proof Level Maintainer with Two Switches DPST for Low and High Level Shutdown or Alarm LM303-EX