- SKU:
- 77192762
- Weight:
- 1.20 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2-3 weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 78700420
The Murphy I/O Module XM500 is a configurable Input/Output (I/O) module designed to bring analog and digital inputs and output onto the SAE J1939 CAN. The XM500 configuration tool provides a user-friendly interface allowing the user to create or change the configuration used on the XM500 module. Your application may require monitoring of other information which may not be provided by the OEM engine or transmission electronic control unit (ECU), such as fuel level, hydraulic oil pressure or a low engine coolant level switch. The XM500 is ideally suited to bring the additional information you need onto the J1939 CAN bus and can be configured to broadcast fault codes and activate digital outputs per input condition such as fuel level low, hydraulic oil temperature high, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView 101.
PRODUCT SPECIFICATIONS:
- Murphy Part No.: XM500
- Power Input: 8 to 28VDC
- Communication Ports: CAN J1939
- Operating Temperature: -40° F to 185° F (-40° C to 85° C)
- Digital Inputs: 4 - Ground or battery positive activation (Outputs are NOT reverse polarity protected. Damage will occur if B+ is connected to the outputs. Damage incurred from improper installation is not covered under the Murphy limited warranty policy.)
- Thermocouple Input (When the thermocouple input is used, only 5 resistive, 4-20 mA, or 0-5 VDC can be used instead of 7.): Type K and Type J
- Analog Inputs (Analog inputs can be exchanged for digital inputs (battery ground activation only) for a total of 11 digital inputs.): 1 - Battery Supply Voltage (dedicated), 7 - Configurable as 0-5 VDC, 4-20 mA, resistive senders (Other resistive senders can be supported. Contact Murphy’s Industrial Panel Division for programming charges.) or used as an additional digital input
- Digital Outputs: 2 Sinking (500mA)
- Product Weight: 10 ounces
- Shipping Weight: 12 ounces
- Shipping Dimensions: 4" x 6" x 2"
Product Condition: NEW
