Murphy Liquid Level Swichgage with Snap-Switch and Back Connection Option - EL150K1-BC

The Murphy Liquid Level Swichgage with Snap-Switch and Back Connection Option EL150K1-BC is a combination liquid level gauge and low limit switch. Unit includes (1) a chamber with pivotal float, (2) an indicating dial with pointer, and (3) a low level contact. When properly installed and maintained, the float operates the pointer which, in turn, both indicates level during normal operation, and closes a switching circuit if the level falls to the low-limit set point.

The primary use of the EL150K1-BC is for engine cooling systems, surge or expansion tanks, condenser radiator or vapor phase systems, pressurized or atmospheric systems. The Liquid Level Swichgage can also be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activates alarms and/or shut-down at a predetermined minimum level. This instrument is built for low pressure systems with a maximum of 25 psi (172 kPa) [1.72 bar].

FEATURES:

• Indicating Gauge
• Low Limit Switch
• Float Operated
• Monitors Level of Coolant, Lube Oil, Diesel Fuel And Hydraulic
• Back Connection Option

PRODUCT SPECIFICATIONS:

• Part No.: EL150K1-BC
  
• Case: Die cast aluminum, poly-urethane coated; approximate dimensions; 5 x 4-3/4 x 2-3/4 in. (127 x 121 x 70 mm)
• Enclosure Rating: IP35
• Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center
• Float: Brass
• Lens: Polycarbonate
• O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons. Maximum temperature 250°F (121°C)
• Gasket: Nitrile
  
• Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting
• Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC
• Wire: (3) 18 AWG x 14 in. (1 mm2 x 356 mm)
• Shipping Weight: 42 oz. (1.2 kg.)
• Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in. (133 x 133 x 140 mm)