Murphy Magnetic Pickup Type 6061 Aluminum 4-1/2 in. - MP7905

A magnetic pickup is an AC generator. It is normally installed into the flywheel housing of an internal combustion engine, so that the starter ring gear acts upon it to generate a voltage pulse each time a gear tooth passes the end of the sensor.

PRODUCT SPECIFICATIONS:

• Murphy Part No.: MP7905
• Housing Material: Type 6061 Aluminum/Anodize Class 1
• Locknut: Steel Nickel Plated
• Output Leads: Two insulated leads, 20AWG, STR/TEF insulated per MIL-W-16878D Type E, 1 White and 1 Black
• Output Voltage: 200 V.P.P. TYP. (tested at 1000 I.P.S. 20 Pitch gear, 0.005 Gap., and 100K OHM Load)
• Coil Resistance: 2500 Ohms TYP
  
• Potting: Internal portion of pickup is filled with epoxy resin, making the magnetic pickup oil and moist resistant
• Temperature: -65° to +225°F (-54 ° to 107°C)
• Total Length: 4-1/2 in. (114 mm)
  
• Threaded Length: 4-1/2 in. (114 mm)
  
• Thread Size: 3/4-16 UNF
  

Product Condition: NEW

California required Prop65 warning.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.