Murphy Marine Compact Configurable HelmView Display with 7 in. TFT LCD - HVS780

The Murphy Marine Compact Configurable HelmView Display with 7" TFT LCD HVS780 is a full-featured, configurable display that integrates electronic engine, transmission and vessel information into an easy to read operator interface. Operators can monitor multiple parameters, including single or dual engines, fuel usage, and much more. The HelmView HVS780 display features a full-color 7-inch / 178mm bonded LCD screen for rugged environments. It has ten tactile push buttons that can easily be pressed with or without gloves. In addition, it comes pre-loaded with a standard marine software configuration that features custom parameters and interface screens tailored for commercial marine applications.

Customize the HelmView display with Murphy’s PowerVision Configuration Studio, a powerful tool that allows you to create custom configurations for unique commercial marine applications - including tug boats, fishing vessels, search and rescue, cargo and more. The HelmView HVS780 paired with the PowerVision Configuration Studio extends custom configuration from only monitoring to equipment control, data logging, and additional alarming. You can even add custom graphics and company branding to the user interface.

Display Parameters

The following are some of the parameters displayed by the HelmView HVS780 in English or Metric units (when applicable, consult engine or transmission manufacturer for SAE J1939 supported parameters).

Engine RPM • Engine Hours • System Voltage • % Engine Load at the Current RPM • Coolant Temperature • Oil Pressure • Transmission Oil Temperature • Transmission Oil Level • Tank Levels • Course over Ground* (NMEA GPS Antennae required) • Speed over Ground* (NMEA GPS Antennae required) • Longitude and Latitude* (NMEA GPS Antennae required) • Real Time Display* (NMEA GPS Antennae required) • Instantaneous Fuel Usage • Trip Fuel • Navigational Bearing • Active Service codes • Stored Service Codes (when supported) • Video

FEATURES:

• Video Input
• Multiple Night Viewing “Blackout Mode” Options
• Configuration Software Option Offers Virtually Unlimited Possibilities
• Rugged Design That Is Simple To Use
• Bonded 7-inch LCD Screen Viewable In Direct Sunlight
• Customizable For Additional Commercial Marine Applications
• Color Display For Modern Electronic Engines and Vessel Monitoring Using SAE J1939 Controller Area Network

PRODUCT SPECIFICATIONS:

• Model No.: HVS780
• Part No.: 78700561
• Display: 7” (178mm) color transmissive TFT LCD
• Resolution: WVGA, 800 x 480 pixels, 16-bit color
• Viewing Angle: ±65o horizontal, +55o/-65o vertical
• Orientation: Landscape
• Backlighting: LED, 1000 nit typical brightness 40,000 hr. minimum
• Contrast Ratio: 400:1
• Refresh Rate: 60 Hz
• Microprocessor: Freescale i.MX357, 32 bit, 532 MHz, ARM11 core
• QNX Real-time Operating System
• Flash Memory: 2 GB total, 1 GB available for data logging
• RAM: 128 Mbytes SRAM
• Operating Voltage: 6-36 VDC, reverse polarity protected
• Video input: 3 NTSC/PAL (single channel viewable)
• Communications: (2) CAN 2.0B with one isolated (NMEA compliant); J1939 and CANopen protocols, proprietary messaging • (1) RS-485 serial (MODBus master/slave
• Connectors: 2 AMPSEAL 23 Pin (AMP 770680-1 and AMP 770680-4)
• Keyboard: 10 tactile pushbuttons with white LED backlight
• Touchscreen: (optional) projected capacitive
• USB: (1) USB 2.0 host (OTG, full speed)
• Real-time clock: with Li-ion rechargeable battery
• Shock: ±50G in 3 axis
• Output: (1) 500mA switched low-side • (1) Frequency Out (0Hz - 5 kHz), 120Vpk-pk max Vbat rms square wave
• Inputs: (3) Analog 0-5VDC, 4-20 mA, or resistive, 10-bit resolution • (5) Discreet Digital 0-5V, Active High • (1) Frequency In (2Hz - 10 kHz), 5Vpk-pk.min, 120Vpk-pk max
• Operating Temperature: -40°C to +85°C
• Storage Temperature: -40°C to +85°C
• Protection: IP66 and 67, front and back
• Emissions: IEC 60945, 95/54/EC
• Immunity: SAE J1113
• Vibration: Random vibration, 7.86 Grms (5-2000 Hz), 3 axis
• Dimensions: 9.75 x 6.23 in. (247.7 x 158.2mm) landscape
• Unit Depth: 2.58 in. (65.49 mm)
• Case material: PC/ABS, ISO 3795 (SAE J369, FMVSS 302) rated
• Mounting Options: Front Mount, Back Mount, or RAM Mount