- SKU:
- 77180273
- Weight:
- 0.45 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approx 2-3 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 5707735
The Murphy PXT-K-100 pressure transmitter is a state-of-the-art instrument providing 4-20 mA output. This Piezoresistive Pressure Transmitter contains a transducer comprised of a piezoresistive silicon chip mounted on a glass-metal feed-through header welded into a stainless steel housing and filled with silicone oil. The very thin laser-welded stainless steel isolation-diaphragm completes the front side. Media pressure is transferred from the stainless steel isolation-diaphragm via the oil inside the cell to the silicon measuring chip. This construction, combined with the advanced internal signal conditioning circuitry, results in a rugged instrument with extremely small temperature error and class-leading EMI/RFI resistance.
PXT-K Series Pressure Transmitters can be used in applications such as compressors, engines, process control, liquid level and pumps.
Replaces PXT-100.
PRODUCT SPECIFICATIONS:
- Murphy Part No.: PXT-K-100
- Pressure Range: 0-100 psig
- Output Signal: 4-20mAdc
- Operating Temperature: -40 to 180° F (-40 to 82° C)
- Compensated Temp Range: -20 to 160° F (-29 to 71° C)
- Process Connection: 1/4 NPT female with 7/8” Hex nut
- Electrical Connection (PXT-K-XXX): 1/2” NPT male conduit connection with 60” long cable, vented
- Enclosure: NEMA 4/IP65 or better
- Body: 316L stainless steel. Complies with NACE MR01
- Wetted Parts: 316L stainless steel
- Environmental Effect (Humidity): No effect for 0-95%, non-condensing
- Mounting: Transmitter can be installed in any axis. Transmitter position has negligible effect on performance as long as it is per-pendicular to the flow being monitored
- Shock Resistance: 1000g per IEC 60068-2-6 (Mechanical Shock
- Vibration Resistance: 20G per IEC 60068-2-6 (Vibration under resonance)
- Wiring Protection: Protected against reverse polarity and short circuit, 48 VDC Maximum
- Supply Voltage: 8 - 30 VDC (Typically 24 VDC)
- Transmitter Output: 4-20 mA, two wire configurations with load characteristics
- Insulation: Greater than 10 MΩ @ 300 VDC
- Electromagnetic Compatibility (EMC): Standards; EN 61000-6-2:2005, EN 61000-6-3:2007, EN 61326-2-3:2006
- Voltage Surge/Spike Protection: Protection against a 600 volt spike per IEC 60-2
- CSA (c/us): Class I / II / III, Div 1 , Groups A-F T4, Class I / II / III, Div 2, Groups A-D,F,G T4
- Shipping Weight: 6.5 ounces
Product Condition: NEW
