- SKU:
- 77129504
- Weight:
- 1.27 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 3-4 Weeks)
- Special Order Available:
- Increments of 12
- QPO:
- 0
- COO:
- US
- MPN:
- 8600260
The Zerostart Copper Threaded Coolant Immersion Heater 8600260 is designed for Caterpillar models C9, C15, C16, 3406 (Except 1998 models), 3406 (with BrakeSaver-through 1993 models), 3406E, and 3408 (1099 CID), Detroit Diesel models 6V-71, 8V-71, and Series 60 (11.1L 677 CID, 12.7L 775 CID), International/Navistar model V800 (798 CID).
INSTALLATION INFORMATION:
- For Caterpillar models C9, C15, C16: Install in oil cooler rear bonnet
- For Caterpillar models 3406 (Except 1998 models), 3406 (with BrakeSaver-through 1993 models), 3406E: Without BrakeSaver: Replaces 1" pipe plug in oil cooler rear bonnet (pictured). With BrakeSaver: Install in front bonnet.
- For Caterpillar model 3408 (1099 CID): Replaces 1" pipe plug behind oil cooler on Right cylinder bank.
- For Detroit Diesel models 6V-71, 8V-71: Replaces 1" pipe plug on front face of Left cylinder bank.
- For Detroit Diesel models Series 60 (11.1L 677 CID, 12.7L 775 CID): Pre 1991 Engines - Replaces 1" NPT plug in water pump outlet casting on Right Front side of engine. 1991 and newer replaces 1" plug near top front of oil cooler.
- For International/Navistar model V800 (798 CID): Replace 1" pipe plug in oil cooler bonnet.
PRODUCT SPECIFICATIONS:
- Zerostart Part No.: 8600260
- Wattage: 1500
- Voltage: 240
- Thread Size: 1" NPT
- Element Length: 5" (12.7 cm)
- For Use In: Water
- Without Thermostat
- Element Construction: Copper
- Type: Immersion
- Replacement Cord: 8608377
Product Condition: NEW
